(WIP)
This decoder is to support a step motor driven turntable developed by MGV.
The setup needs one base address.
13 inputs and 3 outputs are reserved.
Purpose | Offset | Length | I/O | Remark |
---|---|---|---|---|
Track position | 0 | 6 | I | 0…63 |
Rotation direction | 6 | 1 | I | 1 = CCW, 0 = CW |
New position | 7 | 1 | I | 1 = read new track position (puls 500ms) |
At position | 8 | 1 | O | 1 = position reached (reset at new position flag set) |
Sensor 1 | 9 | 1 | O | bridge loco sensor |
Sensor 2 | 10 | 1 | O | bridge loco sensor |
Lights | 11 | 1 | I | (optional) |
Bridge signals | 12 | 4 | I | (optional) |