bidib-compat-en
OpenDecoder
OpenDecoder 1
Mode 3
Main signal
- Interface
- Protocol: NMRA-DCC
- Address Main Signal: 1, 5, 9 or 13 and so on. (Flat addressing: 8 addresses per decoder)
- Port: 0, Flat addressing
- Control: Linear
- Type: Accessory
- Option: As switch
- Details
- Aspects: 3 or 4
- Signal Type: Lights
- Signification: Main
- Aspect number: green=2, red=1, yellow=0, white=3
Important
The aspect numbers will map the output/aspect of the decoder; Change according your needs.
- In case the signal symbol shows "red" and the signal LED is showing "green", just swap 2 and 1. Keep the aspect numbers in the range of 0 - 3; Higher values will address the next decoder.
Distant signal
Use the same settings as for the main signal except for:
- Interface
- Address: 3, 7, 11, or 15 and so on.
- Details
- Aspects: 3 or 2
- Signification: Distant
bidib-compat-en.txt · Last modified: 2018/11/12 08:56 by 127.0.0.1