BiDiB

Algemene informatie

BiDiB is een nieuw protocol dat P&P ondersteunt op een hoog betrouwbaarheids nivo.
Kijk voor meer informatie op: http://bidib.org/


Geschikt voor

  • Stroomdetectie melders .
  • RailCom detectie; Rocrail Identifier.
  • Leest CV waarden on the main van Railcom loc decoders .
  • Loc besturing, snelheid, functies …..
  • Besturing randapparatuur
  • CV's programmeren .
  • Boosters aansturen.


Setup

General


Interface ID

IID for addressing this interface directly from without Rocrail.

Serial Port

Device name of the RS232 port.
Typically COM1, COM2, COM? for Windows, and /dev/ttyS0. /dev/ttyS1, /dev/ttyUSB0 for Linux based systems.

Baudrate

Communication speed in Bits Per Second.

Sub-Library

  • Serial (USB)

Options


Secure ACK

Enable

To enable the secure ACK option of the BiDiB protocol.

Interval

The secure ACK interval in 10ms units. 20 is the default. (200ms)
If Rocrail did not send an ACK with in this time frame the event will be resend by the sensor unit.

Nodes


This node overview list will be automatically generated during the connection setup between Rocrail and the BiDiB interface.

Configure

Read the Configuration page for more information on node configuration.


Hardware



Cable

CAT-5
www.fichtelbahn.de_images_bidib_topology_full.jpg


Links


Personal Tools