User Tools

Site Tools


cangc9-firmware-en

CAN-GC9 Firmware

Copyrights

Message Format

CAN-Data
Byte: 0 1 2 3 4 5 6 7
Contents: OPC_DDEC EventH EventL Header BiDi-Type/Data


Header
Bit: 7 6 5 4 3 2 1 0
Meaning: 1=BiDi, 0=RFID¹ 1=Occupied 1=BiDi detected 1=Forwards BiDi Type 0-15

¹) Rest of the data is the RFID number.

BiDi-Type BiDi-Data
0 No information None
1 Address Byte6[0-5]=AddrH, Byte7=AddrL
2 PoM Read response Byte4=CV-Value, Byte5=CV-IndexH, Byte6[6-7]=CV-IndexL, Byte6[0-5]=AddrH, Byte7=AddrL


I/O

Proposal

Pin Use
RB4/RX Read BiDi at 120 or 250kBaud
RB0 DCC detection: Trigger for reading BiDi
RB3 Current detection
RA0 Software UART for sending data to the CAN-GC4
RA1 LED1 Running
RA2 LED2 Current detection
RA3 LED3 BiDi scanned
RA4 LED4 Data send to CAN-GC4
RB2 Jumper for Lissy/RailCom
RA6/7 8MHz Resonator



Files

HEX

Sources

ID-12 Data Format



Lissy Protocol

120kBaud.
lissy-protocol-1.jpg

cangc9-firmware-en.txt · Last modified: 2018/11/12 08:56 by 127.0.0.1