User Tools

Site Tools


inter10-en

LDT INTER-10

ContentCommand StationsLDT


inter-10-g_13_ic.jpg

The INTER-10 is a RFID reader concentrator which can handle up to 99 COL-10 readers.


Setup

Only the listed settings of this general dialog are of concern; The rest is ignored.

Baudrate

9600 or 19200

Handshake

None

Jumpers

J2 and J3 must be open for mode 0x25.


RFID Notation

See for the RFID notation: CAN-GC4 RFID Notation
The same notation must be used for the identifier in the Loco Setup.


Protocol

The used protocol is very simplistic and does not use any kind of handshake nor any way to determine the packet start.
Data transfer can become invalid in case of any distortion.

inter10-en.txt · Last modified: 2020/05/13 00:37 by rainerk