User Tools

Site Tools


lcm-en

Table of Contents

Light Control Module

ContentCommand StationsPerZ

  • Light Control Module


www.persmodelrailroad.com_el_lmod_c.jpg


Setup


The only thing to setup is the serial device. All other settings are fixed.


Addressing

Outputs


Address

11.025+
The hard coded LCM device address plus one.
Set this field to 1 to address device address 0.

Port

The zero based port on the LCM.

Value

The intensity of the selected port: 0…63.


lcm-en.txt · Last modified: 2018/11/12 08:56 by 127.0.0.1