Innovative Model Railroad Control System

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Locomotives: SBT - Soft Brake Timer======
[[:english#objects|{{  :objects.png}}]][[:english|{{  :rocrail-logo-35.png}}]]
[[english|Content]] -> [[english#objects|Objects]] -> **Locomotives**
  *  [[loc-index-en|Index]] | [[loc-gen-en|General]] | [[loc-int-en|Interface]] | [[:loc-speed-en|Speed]] | [[loc-details-en|Details]] | [[loc-fun-en|Functions]] | [[loc-consist-en|Multiple Units]] | [[loc-cv-en|CVs]] | [[loc-bbt-en|BBT]] | **[[loc-sbt-en|SBT]]** | [[loc-bat-en|BAT]] | [[loc-calibrate-en|Calibrate]] | [[loc-shunting-en|Shunting Mode]]

 \\

=====SBT Tab=====
{{:loc:loc-sbt-en.png?800}}\\
The SBT records can be sorted by clicking on one of the columns headers.\\


 \\
=====SBT=====
**SBT = Soft-Brake-Timer**\\
Deceleration can be used for reducing speed by the **Interval** and **Decelerate** parameter.\\
Be careful with using this option; It can overload the Command Station with too many Speed commands.\\
Configuring the CV3/4 is a better approach but for some high speed trains this could be difficult.\\
**SBT** is __not__ a "Self learning" process like __**[[loc-bbt-en|BBT]]**__ and must be configured manually.\\ 



====Default====
SBT is activated for the selected loc by filling in the default values for that loc. The default values are used everywhere on the layout when the locomotive has to decelerate from a higher to a lower speed (except inside blocks with BBT when the locomotive has to stop).
This means that once switched on, SBT applies everywhere - for that loc. \\
**[[#decelerate|Decelerate]]** speed reduction per interval.\\
**[[#interval|Interval]]** between the speed commands. \\

  * **Important:** The option **[[#regulated|Regulated]]** on this tab need to be activated, for SBT to take effect.
====Default override====
Where the default values of SBT do not fit, create an individual line with different values for the corresponding block. \\
This can also be a line with 0 / 0 to completely deactivate SBT there.

==== Related options ====
This loco option should be set in case SBT should start at the enter event:\\
See: __**[[loc-details-en#Reduce speed at enter]]**__ \\

====Block====
The default key for a SBT record.\\
Format: "BlockID"\\

====Train====
If set this value is used as extended key for a SBT record.\\
Format: "BlockID-TrainID"\\
If no record was found on entering a block with this extended key the default key is used to look up a SBT record.\\





====Interval====
Must be set to enable SBT.\\
The interval between the speed commands in units of approximately((Operating System dependent)) 100ms.\\
====Decelerate====
Decelerate is the speed reduction per Interval, it will be subtracted from the actual speed until the wanted speed is reached.\\
This option is disabled in case set to zero.\\
| This value does __not__ represent decoder speed steps but a part of the speed range set by V_Max. |
=====Buttons=====
==== Add ====
A SBT record with the set parameters will be added to the list.\\ 

====Delete====
Delete a selected SBT record.\\

====Delete all====
Delete all SBT records.\\

====Modify====
The modified parameters are inserted in the SBT record.\\

====Export====
Export all SBT records in a XML file.\\

====Import====
Import SBT records from a XML file.\\
 \\