Innovative Model Railroad Control System

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== OpenCar RF-Booster / BiDiB-RF-Basis ======
[[:english#command_stations|{{  :interface.png}}]][[:english|{{  :rocrail-logo-35.png}}]]
[[:english|Content]] -> [[:english#command_stations|Command Stations]] ->  **[[:opencar-rfbooster-en|DCC-RF-Booster / BiDiB-RF-Basis]]** 

 \\
|{{:opendcc:dcc-rf-booster_produktbild_04_web.jpg?300}}|{{:opendcc:bidib-rf-basis.png?300}}|
|  DCC-RF-Booster  |  BiDiB-RF-Basis  |
 \\
=====Introduction=====
The OpenCar __**[[https://forum.opendcc.de/wiki/doku.php?id=ocs:rfmbasis:dccrfbooster|RF-Booster]]**__ and __**[[https://forum.opendcc.de/wiki/doku.php?id=ocs:rfmbasis:bidibrfbasis|BiDiB-RF-Basis]]**__ can be controlled by a DCC input signal or by connecting to the TTL-Serial port.\\
Using the serial connection makes it possible to get the battery percentage, km/h and POM.\\
The **rfbooster** library uses this serial connection.\\


 \\
=====Supported Commands=====
  * POM set/get
  * Car speed and functions
  * Reporting battery, speed, __**[[:bidib-en#irm_location_reports|position]]**__ and POM

 \\

=====Setup=====
{{:opendcc:rfbooster-setup-en.png}}\\
//Only the listed parameters are used by the **rfbooster** library.//\\
====Interface ID====
Unique ID for this controller.\\
====Port====
The serial port depends of the used operating system.\\
====Baudrate====
The default baudrate of the RF-Booster is 19200.\\
The default baudrate of the RF-Basis is 115200.\\


 \\

=====Links=====
  * {{:opendcc:interface_dcc-rf_booster.pdf}}
  * http://forum.rocrail.net/viewtopic.php?f=47&t=13549
  * https://forum.opendcc.de/wiki/doku.php?id=ocs:rfmbasis:dccrfbooster