opendcc-specials-en
OpenDCC
Special
- The loccnfg attribute is new and is introduced for OpenDCC and Tams to inform those CS over the p50x protocol the loc decoder settings.
- Short IDs for throttles.
New p50x Opcode
XLokCfgSet (0x86) - length = 1+4 bytes
This opcode is not known by the IntelliBox, but is understood by OpenDCC and in upcomming releases of the Tams CS.
Command bytes:
Byte | Description |
---|---|
0 | 0x86 XLokCfgSet |
1 | LSB part of decoder address |
2 | MSB part of decoder address (Range: 1 .. 10239) |
3 | Decoder-Format: MM1, MM2 or DCC, coded as 0,1,2 |
4 | number of speed steps (without stop): 14, 28 oder 126 |
Response: 1 byte code
Mnemonic | Value | Description |
---|---|---|
OK | 0x00 | OK, command accepted |
XBADPRM | 0x02 | decoder address out of range (1 .. 10239) |
XNOSLOT | 0x0B | too many non default decoder settings; adjust default decoder. |
opendcc-specials-en.txt · Last modified: 2018/11/12 08:56 by 127.0.0.1