Innovative Model Railroad Control System

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Zimo MX1, MX1EC ======
[[:english#command_stations|{{  :interface.png}}]][[:english|{{  :rocrail-logo-35.png}}]]

[[english|Content]] -> [[english#command_stations|Command stations]] ->   **Zimo MX1, MX1EC** 

 \\
{{http://www.zimo.at/web2010/images/MX1m2000_freigestellt.GIF?300}}\\
 \\

 \\
=====ASCII Protocol=====
The Zimo support is very poor when using the ASCII protocol because it does not provide any way to get sensor events which is a K.O. criterion for running Rocrail in auto mode.\\
It is only possible if you add a second controller, like the HSI88, to get the needed events.
====Supported Loco Decoder Protocols====
  * DCC Short (N)
  * Märklin (M)

====Supported Accessory Decoder Protocols====
  * Default (Z) 
  * NMRA-DCC (N)
  * Märklin (M)

====Firmware Version 2====
To disable sending 12 loco functions set the version field to 2.\\

 \\
===== Binary Protocol =====
{{:zimo:zimobin-setup-en.png}}\\
====Locomotives/Switches====
This option is needed for setting up the decoder information in the Command Station for locos and switches controlled manually.\\

====Version====
^ Version  ^ Characteristics  ^
|  0  | Accessory addressing inverted, compatible with previous revision, no error checking. | 
|  1  | Accessory addressing normal, compatible with other CS, no error checking. | 
|  2  | Accessory addressing normal with 1 time resend. | 
|  3  | Accessory addressing normal repeat until Ack is detected. |  

====Emergency Break====
The Emergency Break break will toggle the broadcasting to the mobile decoders.\\
This is not the standard behaviour for the Emergency Break in Rocrail!\\


 \\

=====MX9=====
Zimo MX9 has 8 Sections with two current sensors, each Section has Zimo BiDi feedback and short circuit detection.\\
MX9 addressing must start with 901.\\

====Offset====
^ Offset ^ Sensor type ^
| +0  | Normal feedback sensor |
| +1000 | Short circuit detection feedback |
| +2000 | BiDi feedback |


 \\

=====Documentation=====
  * ASCII {{zimo:zimo-ascii-prot.pdf}}
  * Binary {{zimo:zimo-bin-prot.pdf}}