Differences

This shows you the differences between two versions of the page.

--- gca-wio_02-en [2020/07/04 14:35] – typo smitt48
+++ gca-wio_02-en [2024/04/07 09:03] (current) – [Hardware] rjversluis
@@ Line 1: / Line 1: @@
 ====== WIO_02: RBUS/MBUS/Rocnode/USB/WIFI General I/O, Servo, LED, RFID, Display, Sensor, RailCom. ======
 [[english|{{  rocrail-logo-35.png}}]]
+  * [[:hardware-en|GCA Hardware]]
+    * [[:hardware-en#wio|GCA WIO]]
+    * [[:wio:firststeps-en|WIO First steps]]
  \\
@@ Line 12: / Line 13: @@
 ===== Features =====
 This unit is based on WIO_01, but with even more options for I/O.\\
-  * Rocrail communication via Wifi or usb
+  * Rocrail communication via Wifi or CAN
-  * Communication bridge for RCAN (extended CAN)
-  * Communication bridge for MBUS
-  * Communication bridge for RocNet
   * 32 x digital I/O (usable for a large range of GCA extension boards)
   * 4 x servo (on board supply)
-  * 4 x extra servo with external supply
   * 2 x RFID input
   * switching 5 V power regulator for more economical energy consumption
   * I2C connection for display
-  * connection for GCA215 Railcom sensor
+  * connection for GCA214 Railcom sensor
   * output for fastled
+  * output for stepmotor driver
+  * RocNetNode I2C connector
+\\
+**This board is still under development.**
+\\
+===== Firmware info =====
+Since this board is using same firmware as other WIO related units, the complete concept\\
+is explained in one page.
+[[  https://wiki.rocrail.net/doku.php?id=arduino:wio-en  ]]
 ===== Description =====
 Based on experiences with Lolin D32, used in WIO_Control unit, it provided much\\
@@ Line 41: / Line 48: @@
 ===== Hardware =====
 |  {{ :gca:wio_02_sch.pdf |The schematics}}  |
-|  {{ :gca:wio_02_pcb.pdf |The pcb and parts positions}}  |
+|  {{ :gca:wio_02_v2_pcb.pdf |The pcb and parts positions}}  |
-|  {{ :gca:wio_02_partsliist.pdf |Bill of materials}}  |
+|  {{ :gca:wio_02_v2_parts.pdf |Bill of materials}}  |