Action disabled: index
gca146-en
Table of Contents
GCA146 Manual control for Turntable / Fiddle yard controller GCA145
A simple board
The hardware files
Starting GCA145 Version NV1.5+, S2, R17 and led are no longer used.
N.B. Self made pc-boards are not supported! |
---|
The previous version, MGV146 board is very much useable too.
All info about the MGV146 board is found here
Connection with GCA145
IMPORTANT NOTE !!!!!!
Some users seem to know better, and solder wires directly to the pins or the pc-board.!
That is totally unacceptable !!
Wires will easily break off, and cause a lot of damage in many cases.
So use connectors !!!!!
This cable is a straight connection, 8 wires, so pin1 to pin1, pin2 to pin2, etc.
Two connectors PSK 254/8W are used with 16 PSK Pins.
This special plier will be sold for net price of € 20,00 if ordered together with complete kits.
gca146-en.txt · Last modified: 2018/11/12 08:56 by 127.0.0.1