Color

ContentObjectsOutputs



Output Dialog Interface Tab.

Channel

The RGB channels for Color type light port.
Support in:

  • RocNet & RocNetNode with the Pi03
  • DMX Art-Net; The channel numbers are relative to the interface address subtracted with one.
  • BiDiB The channel numbers are Backlight-Ports at OneDMX (Channel 1: Backlight_0 Channel 2: Backlight_1 …)

DMX

If the DMX device does not have a dimmer channel, or it must be controlled in 3 channel RGB mode, the brightness channel should be set to zero.
In this case the values for RGB are recalculated using the brightness value: ( Color value * Brightness value ) / 255


RGB

Default color.


White 1/2

The optional white color and channels can be used for cold/warm white LEDs.
See the Weather Color options for more information.


Change color

In Rocview outputs with the color option activated will popup an extra menu item to open the Color Dialog:


The color dialog its look&feel is operating system dependent.
1)
After selecting a new color a command with the new RGB values will be send to the output object.
The brightness must be set on the interface tab: Value.

1) Under Mac OSX the dialog can only be closed and not cancelled.

Personal Tools