Differences

This shows you the differences between two versions of the page.

--- rocnet:headless-cam-en [2021/01/22 11:58] – rjversluis
+++ rocnet:headless-cam-en [2022/06/17 09:42] (current) – rjversluis
@@ Line 3: / Line 3: @@
 [[:english|Content]] -> [[:english#rocview|Rocview ]] -> [[:rocnet:cam-en|Camera Streaming]]
   * **[[:rocnet:headless-cam-en|Headless Setup]]**
+  * [[:raspi:install:rpi-install-en|Rocrail graphical install]]
 |< >|
@@ Line 8: / Line 9: @@
  \\
  \\
-=====SD Card with PiOS Lite=====
+=====SD Card with Pi OS Lite (32bit)=====
-{{ :rocnet:pios-imager.png?300}}
+Download the Raspberry Pi Imager:
-See
   * __**[[https://www.raspberrypi.org/software/|Raspberry Pi Imager]]**__
-on how to create a SD image.\\
+{{:rocnet:pi-img-os-0.png?240}}{{:rocnet:pi-img-os-1.png? 240}}{{:rocnet:pi-img-os-2.png? 240}}{{:rocnet:pi-img-os-3.png? 240}}{{:rocnet:pi-img-os-00.png? 240}}\\
+Insert a SD-Card.\\
+Start the "Raspberry Pi Imager" program.\\
+Select:
+  - CHOOSE OS
+  - Pi OS Other
+  - Pi OS Lite (32bit)
+See also __**[[:raspi:install:rpi-install-en#advanced_options|Advanced Options]]**__ for setting up SSH and WiFi.\\
  \\
 =====Config the Boot Partition=====
-Create locally a file named as "wpa_supplicant.conf" with the following content:
+Insert the SD-Card again, after creating of the Image on the SD-Card has finished.\\
+The SD-Card should be visible in the File-Explorer as ''boot''.\\
+ \\
+To make the Zero able to connect to the WiFi, it must get some settings to get this done.\\
+The easiest way is to create a text file locally named as ''wpa_supplicant.conf'' with the following content:
 <code>
 country=DE
@@ Line 23: / Line 37: @@
 update_config=1
 network={
-       ssid="<my SSID>"
+       ssid="<my SSID1>"
        psk="<my PASSWORD>"
        key_mgmt=WPA-PSK
+       priority=2
+}
+network={
+       ssid="<my SSID2>"
+       psk="<my PASSWORD>"
+       key_mgmt=WPA-PSK
+       priority=1
 }
 </code>
-Replace the "<my*>" values with the real ones.\\
+Replace the "<my*>" values with the access information of the Access Point.\\
-  * **Note:** //Multiple network definitions seems to be allowed.// \\
+  * **Note:** //Multiple network definitions may be added. The highest priority will be connected first if available.// \\
+Copy an empty file named ''SSH'', and ''wpa_supplicant.conf'' to ''boot''. (Under Windows mostly drive ''D:'')\\
-Copy an empty file named "SSH", and "wpa_supplicant.conf" file into the boot partition of the SD-Card:\\
+to the boot partition of the SD-Card:\\
 {{:rocnet:cam:boot-1.png?400}}{{:rocnet:cam:boot-2.png?400}}\\
@@ Line 158: / Line 179: @@
  \\
 =====Boot speed=====
+Check the services which are not needed for the headless setup:
 <code>
 systemd-analyze blame
 </code>
+Google "raspberry zero systemd-analyze blame" to find tips, because this is a bit out of scope to include it in the Wiki.\\
+ \\
+=====Power consumption=====
+====HDMI====
+Running a headless Zero, there's no need to power the display circuitry.\\
+Add the following line in ''/etc/rc.local'' to disable HDMI on boot.
+<code>/usr/bin/tvservice -o</code>
+(-p to re-enable).\\
+Approximately 25mA reduction.\\
+ \\
+=====Special Boot Options=====
+To be able to use pin 27 and 28 as normal I/O, add an extra line in the /boot/config.txt:
+<code>
+force_eeprom_read=0
+</code>
+  * https://www.raspberrypi.org/documentation/configuration/config-txt/boot.md
@@ Line 167: / Line 210: @@
  \\
 =====Notes=====
+====SFTP File Transfer====
+WinSCP and FileZilla can be used for transferring files to and from the Raspberry Pi.\\
+For more information see:
+  * https://www.raspberrypi.org/documentation/remote-access/ssh/sftp.md
 ====SSH====
   * The terminal/console commands **ssh** and **scp** are available under Linux, Windows10 and Apple macOS.
@@ Line 175: / Line 224: @@
   * **1** System Options
     * **S6** Network at Boot ((Select wait for network connection on boot))
+ \\
+====Disable screen saver====
+In case of a connected display, none headless, without user interaction.\\
+Edit the lightdm configuration:
+<code>$ sudo nano /etc/lightdm/lightdm.conf</code>
+find this section, and add the extra options:
+<code>
+[Seat:*]
+xserver-command=X -s 0 -dpms
+</code>