Content → Objects → Routes

• Index | General | Speed | Commands | Sensors | Permission | Conditions | Wiring

Caution in dealing with permissions! Only set when really needed and desired. Failure to correctly set permissions mean that trains do not find a destination and are a recurring theme in the forum.

To prevent certain Locomotives and or Trains using a route this tab can be used to define which are permitted or not.
The include list is evaluated first. If empty the exclude list is evaluated.

Note: Permissions will be respected in automatic mode without defined destination. In automatic mode with defined destination, however, permissions are not respected for the destination block and the route to the destination block! Hence, with a given destination it is possible to move a loco or a train into a block by, e.g. drag and drop, although the loco- or train-type is not allowed in this block.

Specifies which train types are allowed. All are allowed if no train type is selected.
Further information is found Here.

If set greater than zero it will be compared with the length of the requesting train.
The route cannot be used when the train length (+ Min Block - Train length) exceeds the max. train length allowed.

If set greater than zero it will be compared with the length of the requesting train.
The route will not permit it to use when the train length is less then the min. length allowed.

This number reflects the smallest radius of a train, locomotive or wagon that can safely operate in this route.
If a train, locomotive or wagon has as minimum radius smaller than the radius in a route, the route won't be taken.
No checking is done if this field is left to zero.

Allow commuter trains.

Allow commuter trains only.
This option will reject all normal trains to use this route.

Disallow commuter trains.

See: Loco Interface

All placing types are allowed.

Only placing default is allowed.

Only placing swapped is allowed.

Schedule and random are both allowed.

Only trains running a schedule are allowed.

Only trains without running a schedule are allowed.

A comma separated list of allowed Loco Classes.

• This has no effect if left empty.
• Can be modified by the Route action class.

The allowed Loco Eras. All are allowed if no Era is selected.