Differences

This shows you the differences between two versions of the page.

--- sensor-int-en [2020/09/18 12:19] – [RFID] rjversluis
+++ sensor-int-en [2021/05/05 01:17] – [Type] rainerk
@@ Line 28: / Line 28: @@
 The 32bit RFID number printed on the Tags. (Leading zeros can be left out.)\\
 This can be used in combination with __**[[:arduino:wio-en#id-12la|WIO-Drive and an ID-12LA reader]]**__.\\
-All other addressing, like Node ID and Address, are ignored if the RFID did match.\\
+All other addressing, like Node ID and Address, are ignored if the RFID did match. (But an additional fake address makes it possible to check the plan virtually.)\\
 {{:wio:rfid32.jpg?600}}\\
-Example of the blue Tag scan:
+Example of the blue Tag scan:\\
+{{:wio:rfid-index.jpg}}
 <code>
 OWIO     0885 Mobile 18 [BR218] RFID event [12.0.197.167.148] [12953492]
 OModel   5329 trying to match sensor event: [WIO] id=[12.0.197.167.148] 0:0 uidname=[] state=0 code=BR218 regval=0 info=
-OFBack   0796 fb[s18-] state=OFF code=BR218 dir=0 val=0 count=5 regval[0]=0
+OFBack   0796 fb[s18-] state=ON code=BR218 dir=0 val=0 count=5 regval[0]=0
 </code>
@@ Line 79: / Line 80: @@
 =====Type=====
-^ Value  ^ Type  ^ Manu ^ Remark  ^
+|< >|
+^ Value  ^ Type  ^ Manufacturer ^ Remark  ^
 | 0 | Current sensors | - | Most commonly used; Can also report bi-directional information; Also for Hall Sensors when not used as wheel counters. |
 | 1 | IR Lissy | Uhlenbrock | Can be used with the __**[[:sensor-gen-en#timer|Off timer]]**__ to get it unoccupied. |
@@ Line 86: / Line 88: @@
 | 4 | RailCom | - | Not used; Same as type=0. |
 | 5 | RFID | MERG, LDT | Not used; Same as type=0. |
-| 6 | Wheel counter | **[[:gca173-en|GCA173 Hall Sensors]]**, **[[:mgv141-en|GCA141]]** | Used for wheel or car counting. |\\
+| 6 | Wheel counter | **[[:gca173-en|GCA173]]**, **[[:gca179-en|GCA179]]** and **[[:mgv141-en|GCA141]]** \\ for Hall sensors and Reed contacts. | Used for wheel or car counting. |\\
 | 7 | GPS | **[[:got:got-en|GamesOnTrack]]** | Using the GPS coordinates on the GPS tab. |
-| 8 | Register | - | Can be used for __**[[:turntable-int-en#position_sensors|Turntable position sensor]]**__. (Selectrix based systems)  |
+| 8 | Register | - | Can be used for __**[[:turntable-int-en#position_sensors|Turntable position sensor]]**__.  |
 Read **[[sensor-bi-directional-en|Bi-Directional Communication]]** for more information on this topic.\\
  \\
+=====Register trigger=====
+Specifies the physical quantity for which the value represented by the register bits is defined.
 ===== Options =====
 ==== Active low ====