Differences

This shows you the differences between two versions of the page.

--- userpages:hermannk:terminalstationshortin-en [2020/07/29 13:40] – [How to handle a Terminal Station?] hermannk
+++ userpages:hermannk:terminalstationshortin-en [2021/02/28 09:02] (current) – hermannk
@@ Line 1: / Line 1: @@
 ====== How to handle a Terminal Station? ======
+[[:userpages#Hermann (hermannk)|Userpages - Hermann (hermannk)]] \\
+ \\
 This wiki post originated from a request for a solution with Rocrail. \\ \\
-** The facts: ** Simplified, there is an oval with two opposite trains and a siding. \\{{:userpages:hermannk:terminalstation_shortin_overview.png|}} \\
+** The facts: ** Simplified, there is an oval with two opposite trains and a siding. \\
-A locomotive with wagons drives from the right into a terminal station. Two cases are considered in this documentation: \\
+{{:userpages:hermannk:terminalstation_shortin_globalview.png?|}} \\
+Current sensors are installed as sensors and only the locomotives are recognized by the sensors. The wagons do not consume electricity and are therefore not recognized by the sensors. The siding forms the terminal station for this solution. \\
+Nothing should be changed in these circumstances! \\
+{{:userpages:hermannk:terminalstation_shortin_overview.png|}} \\
+**The operational flow:** a locomotive with wagons drives from the right into a terminal station. Two cases are considered in this documentation: \\
 ) the locomotive is at the front of the train (i.e. the train moves forward into the terminal station with the locomotive ahead); \\
 ) The locomotive is at the rear of the train (i.e. the train goes backwards to the terminal station with the wagons ahead). \\
 In both cases it is assumed that only the locomotive can trigger a sensor (the wagons should not be able to trigger sensors). \\
-Under these conditions, how can the train be stoped in time? \\
+**Question:** how can the train be stoped in time under these conditions? \\
 ===== Proposed solution =====