no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== BiDiB ======
+[[:english#command_stations|{{  :interface.png}}]][[:english|{{  :rocrail-logo-35.png}}]]
+[[:english|Content]] -> [[:english#command_stations|Command Stations]] ->  **[[:bidib-en|BiDiB]]**
+  * [[:bidib:bidib-config-en|Configuration]] | [[:bidib-examples-en|Setup examples]] | **[[:bidib-usb-en|USB Mapping]]**
+  * [[:opendcc-en|OpenDCC]]
+ \\
+===== USB Mapping (Linux) =====
+| //This is partly copied from:// http://www.opendcc.de/elektronik/opendcc/opendcc_rocrail.html | \\
+Create, as super user, following file:\\
+**''/etc/udev/rules.d/10-opendcc.rules''**\\
+and write the next lines in the new file: //(Check if the vendor and product ID matches the OpenDCC hardware with lsusb command.)//\\
+<code>
+SYSFS{idVendor}=="0403", SYSFS{idProduct}=="bfd8", RUN+="/sbin/modprobe -q ftdi_sio vendor=0x0403 product=0xbfd8"
+KERNEL=="ttyUSB*" ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bfd8", SYMLINK+="opendcc/opendcc"
+KERNEL=="ttyUSB*" ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bfdd", SYMLINK+="opendcc/bidib"
+</code>
+After plugging in the hardware a new device folder is created:
+<code>
+$ ls /dev/opendcc
+/dev/opendcc/:
+bidib  opendcc	usb
+</code>
+In the rocrail.ini following device names can be used instead of the ''/dev/ttyUSB*'':
+| OpenDCC CS | **''/dev/opendcc/opendcc''** |
+| BiDiB-GBM | **''/dev/opendcc/bidib''** |
+====Ubuntu 11.04====
+It seems that the rules file should be the last one found in the directory: **99-lb.rules**\\
+Using prefix **10-** will not create the symlink... Bug or feature?\\
+===GBMBoost Master===
+<code>
+KERNEL=="ttyUSB*", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bfd8", SYMLINK+="opendcc/z1"
+KERNEL=="ttyUSB*", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bfdd", SYMLINK+="opendcc/bidib"
+</code>
+<code>
+ls -l /dev/opendcc/
+total 0
+lrwxrwxrwx 1 root root 10 Jul  2 07:25 bidib -> ../ttyUSB0
+</code>