Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+======Signals======
+[[:english#objects|{{  :objects.png}}]][[:english|{{  :rocrail-logo-35.png}}]]
+[[english|Content]] -> [[english#objects|Objects]] -> [[block-en|Blocks]]
+  *  [[block-index-en|Index]] | [[block-gen-en|General]] | **Signals** | [[block-details-en|Details]] | [[block-routes-en|Routes]] | [[block-int-en|Wiring]] | [[block-permissions-en|Permissions]] | [[block-statistics-en|Statistics]] | [[block-td-en|Trackdriver]] | [[block-tracking-en|Tracking]] | [[:block-menu-en|Menu]] | [[:block:block-embededfb-en|Embedded sensors]]
+// \\ // \\
+===== BlockDialog Signals Tab. =====
+{{block-signals-en.png?800}}\\
+{{:block:signals-block.png}}\\
+{{:bidib:signals-block.xml.zip}}\\
+===== Railway Signals =====
+All existing signals which are to be linked to the block are selected from the drop down lists for each block side.
+====Minus(-) side signals====
+The signal pair consisting of the main signal located at the minus side of the block and the associated distant signal (at the plus side) is selected here. \\
+====Plus(+) side signals====
+The signal pair consisting of the main signal located at the plus side of the block and the associated distant signal (at the minus side) is selected here. \\
+\\
+====Signal====
+Main signal to link with this block.\\
+====Distant Signal====
+Distant signal to link with this block.\\
+====Open Block====
+Converts the main signal to the entry signal of the block specified in the list on the right and converts the block chosen from the list to an Open Block.
+|< >|
+|  {{:block:openblock-en.png}}  |
+| Open and Closed Blocks: bk2, bk3 and bk4 are Open Blocks, bk1 and bk5 are Closed Blocks |
+Sets the signal to green if the Open Block is free and the next Open Block is also free.\\
+Sets the signal to yellow if the Open Block is free and the 2nd next Open Block is occupied / obstructed or the 2nd next block is not an Open Block.\\
+Sets the signal to red if the Open Block is occupied / obstructed.\\
+See **[[:block-signaling-en|Block Signaling]]** for details and an example.
+ \\
+=====Special Signals=====
+====Manual operated signals====
+**[[:signal-gen-en#manual_operated|Manual operated signals]]** will disable all wait options of the block.\\
+====State Signal====
+Links a signal with signification __**[[:signal-props-en#block_state|Block state]]**__ with this block its occupying Loco.\\
+This signal shows the current Loco automatic mode or a dash in case no information is provided.\\
+{{:block:stop.png}}\\
+{{:block:auto.png}}\\
+{{:block:idle.png}}\\
+{{:block:wait-nodest.png}}\\
+^ Char/Color ^ State ^ Aspect ^
+| - , gray | No information |  0  |
+| X , gray | Stop |  1  |
+| A, green | Automatic run |  2  |
+| A, blue | Half automatic run |  3  |
+| O, gray | Idle |  4  |
+| W, green | Automatic wait |  5  |
+| W, blue | Half automatic wait |  6  |
+| W, yellow | No new destination found; Check the __**[[:tracefilter-en|Trace]]**__ for more information. |  7  |
+In case a schedule is active the character will have an underscore.\\
+If an activated __**[[loc-tab-en#shunting_on/off|Shunting route]]**__ passes over the signal, the character will be presented in italic and blue {{:block:auto-shunt.png?25}}  \\
+To update the block state signals __**[[rocrailini-automode-en#mode_events|Mode events]]**__ has to be activated!
+ \\
+=====Options=====
+====Reset signals on exit====
+In case an exit sensor is defined, the signals are reset to red in case of an exit event.\\