Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== LDT INTER-10 ======
+[[:english#command_stations|{{  :interface.png}}]][[:english|{{  :rocrail-logo-35.png}}]]
+[[english|Content]] -> [[english#command_stations|Command Stations]] ->   **LDT**
+  * [[:hsi88-en|HSI-88 RS232]] | **[[:inter10-en|INTER-10]]**
+ \\
+[[http://www.ldt-infocenter.com/dokuwiki/doku.php?id=en:rfid-home#rs232_interface_inter-10_for_up_to_99_transponder-reader_col-101|{{http://www.ldt-infocenter.com/dokuwiki/lib/exe/fetch.php?media=de:foto:inter-10-g_13_ic.jpg?300}}]] {{http://www.ldt-infocenter.com/dokuwiki/lib/exe/fetch.php?media=de:cad:rfid-02.gif?400}}\\
+The INTER-10 is a RFID reader concentrator which can handle up to 99 **[[http://www.ldt-infocenter.com/dokuwiki/doku.php?id=en:rfid-home#transponder-reader_col-10_for_em-4102_125_khz_compatible_transponder_rfid-tag|COL-10]]** readers.\\
+ \\
+=====Setup=====
+Only the listed settings of this general dialog are of concern; The rest is ignored.\\
+{{:ldt:inter10-setup-en.png}}
+====Baudrate====
+or 19200\\
+====Handshake====
+None\\
+====Jumpers====
+J2 and J3 must be open for mode 0x25.\\
+ \\
+===== RFID Notation =====
+See for the RFID notation:  __**[[:can-gc4-en#rfid_notation|CAN-GC4 RFID Notation]]**__\\
+The same notation must be used for the identifier in the __**[[:loc-gen-en#identifier|Loco Setup]]**__.\\
+ \\
+=====Protocol=====
+The used protocol is very simplistic and does not use any kind of handshake nor any way to determine the packet start.\\
+Data transfer can become invalid in case of any distortion.
+  * {{:ldt:ldt-rfid-rs232_de.pdf}}