Table of Contents
Dinamo OM32/OC32/PM32
RM-H/U
Library: dinamo
Indirectly controlled by the Dinamo interface.
- Switches/Outputs → OM32 protocol
- Switches/Outputs as Digital Output → DO protocol
- Switches/Outputs as Virtual Output → VO protocol
- Switches/Outputs as Default → PM32 protocol
- Signals → Aspects only
RS485
Library: om32
Baudrate: 9.600, 19.200 or 38.4003)
Directly controlled by a separate RS485 connection.
Addressing
| Field | Value | Range |
|---|---|---|
| Address | OM32 module number + 1 | 1…8 |
| Port | OM32 output number + 1 | 1…32 |
Switches
| Type | ||||
| Field | Motor | Servo | Lights | |
|---|---|---|---|---|
| Param | PWM straight (0…31) | Position straight (0…127) | Aspect (0…12) straight | |
| Value | PWM turnout (0…31) | Position turnout (0…127) | Aspect (0…12) turnout | |
- Uncheck the Accessory option for selecting the wanted port type.
- Check the Single Gate option if only one output should be addressed, otherwise the next output is used for the turnout command. (Dual coil)
Signals
- Aspects(OC32)
- oc32_signals.pdf (User document for UK signals.)
Outputs
| Type | ||||
| Field | Accessory | Motor | Servo | Lights |
|---|---|---|---|---|
| Param | Gain | PWM OFF (0…31) | Position OFF (0…127) | Aspect (0…12) OFF |
| Value | 1 | PWM ON (0…31) | Position ON (0…127) | Aspect (0…12) ON |
- Uncheck the accessory option for selecting the wanted port type.
- The Blink option is available for the accessory port type only.