User Tools

Site Tools


can-gc8-en

Differences

This shows you the differences between two versions of the page.


can-gc8-en [2020/07/01 07:29] (current) – created - external edit 127.0.0.1
Line 1: Line 1:
 +====== CAN-GC8 Display Driver ======
 +[[english|{{  rocrail-logo-35.png}}]]
 +[[:english|Content]] -> [[:hardware-en|Hardware]] -> [[:hardware-en#gca-cbus|CANBUS]]
 +  * [[:cbus:overview-en|CAN-GC Overview]]
 +  * [[:can-gca1-en|CAN-GC1]] | [[:can-gca1e-en|CAN-GC1e]] | [[:can-gcln-en|CAN-GCLN]] | [[:can-gca2-en|CAN-GC2]] | [[:can-gc3-en|CAN-GC3]] | [[:can-gc4-en|CAN-GC4]] | [[:can-gca5-en|CAN-GC5]] | [[:can-gc6-en|CAN-GC6]] |  [[:can-gc7-en|CAN-GC7]] | **[[:can-gc8-en|CAN-GC8]]**
 +    * [[:cangc8-firmware-en|Firmware]]
 +
 +{{ :cbus:display-goes.jpg?300}}
 + \\
 +^By Rob Versluis  & Peter Giling^
 + \\
 + \\
 +{{:cbus:cangc8-gc2-2.jpg?300}}{{:cbus:can-gc8-demo.jpg?300}}
 + \\
 + \\
 +The firmware development of the CAN-GC8 uses the same board as the [[:can-gca2-en|CAN-GC2]], and is for controlling two displays compatible with "[[http://www.reichelt.de/?;ARTICLE=77834|DOG Series]]".\\
 +
 +
 +
 + \\
 +
 +
 +===== Features =====
 +  * Driver for two displays.
 +  * Linefeed controlled by pipe character.
 +  * Adjustable contrast.
 +  * First line double high option.
 +
 + \\
 +
 +=====Display Connection=====
 +Display1 = J4\\
 +Display2 = J3\\
 +
 +^ SPI ^ J3 ^ J4 ^ Remark ^
 +| +5V | 1 | 1 | |
 +| GND | 2 | 2 | Ground |
 +| SI | 3 | 3 | Serial data in |
 +| CLK | 4 | 4 | Clock |
 +| CSB | 5 | 5 | Chip select |
 +| RS | 6 | 6 | Command or Data |
 +
 +
 +
 + \\
 +
 +<html><a name="setup"/></html>
 +===== Setup =====
 +{{:cbus:cangc8-query.png}}\\
 +The CAN-GC8 shows up in the query.\\
 +{{:cbus:cangc8-setup-en.png}}\\
 +
 +====Event number====
 +Short event number; Long events are not supported.\\
 +====Contrast====
 +Display contrast 0...15.\\
 +====First line double high====
 +Show the first line double high if the used display does support this option.\\
 +====Show clock====
 +Show the clock on the first line and date/temp. on the bottom line.\\
 +