User Tools

Site Tools


gca133-en

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

gca133-en [2018/11/12 08:56]
127.0.0.1 external edit
gca133-en [2020/05/28 13:48] (current)
phg [Description]
Line 33: Line 33:
 Both IR Led and SFH5110-36 should match in their IR wave lenght of 940-950 nM. \\ Both IR Led and SFH5110-36 should match in their IR wave lenght of 940-950 nM. \\
 Each gate will work between 5 and 500 mm distance between IR-Led and IR-sensor.\\ Each gate will work between 5 and 500 mm distance between IR-Led and IR-sensor.\\
 +The basic setup will be limited to approx 80mm which would be adequate for most situations.\\
 +Larger range can be achieved to lower R5..R8 (Port 1..4) from 10 KOhm down to zero for maximum.\\
 +Please consider that other ports in the close area might by influenced by it.\\ 
 Also reflection is possible by mounting the two items side by side. It is very convenient to mount them under the rails, and sending and receiving signal throught the gaps between the rail-beans. \\ Also reflection is possible by mounting the two items side by side. It is very convenient to mount them under the rails, and sending and receiving signal throught the gaps between the rail-beans. \\
 Almost anything that comes on top of  will reflect the ir beam onto the sensor.\\ Almost anything that comes on top of  will reflect the ir beam onto the sensor.\\
gca133-en.txt ยท Last modified: 2020/05/28 13:48 by phg