philips:hue-sensors-en
Table of Contents
Philips HUE Accessory
Accessory Types
The following accessory types are supported:
| Type | Units | Remark |
|---|---|---|
| ZLLSwitch | number [1,2,3,4] | Button number last pressed. |
| ZLLPresence | boolean [0,1] | Movement detection. |
| ZLLTemperature | hundreds of °C | Room temperature. |
| ZLLLightlevel | log10 lux | Light level. |
| Daylight | boolean [0,1] | True in case daylight is detected. |
Sensor Setup
HUE sensors are numbered from 1 to 12, which are used as address in Rocrail.
The sensor type must be set to register.
See also:
- Sensor Polling must be activated.
Example
At which point the sensor will turn on/off, depends on the used threshold value on the interface tab.
philips/hue-sensors-en.txt · Last modified: 2019/07/25 08:26 by rjversluis