rocnet:rocnetnode-led-signal-examples-en
Table of Contents
Signal examples
Connecting the LED's
The GCA_PI08 have multiple possibilities to connect the LED's in our Example we will use the J1 and J2 connector
Pin | J1 | J2 |
---|---|---|
1 | + | + |
2 | - | - |
3 | Port 1 | Port 9 |
4 | Port 2 | Port 10 |
5 | Port 3 | Port 11 |
6 | Port 4 | Port 12 |
7 | Port 5 | Port 13 |
8 | Port 6 | Port 14 |
9 | Port 7 | Port 15 |
10 | Port 8 | Port 16 |
SBB Signal with 4 Bulbs
Aspect Values
Now we calculate the pattern. For this purpose, the individual values of the bulbs are added
Aspect | Bulbs | Aspect Value |
---|---|---|
0 | Red | 2 |
1 | Green | 1 |
2 | Green and Orange | 5 |
3 | Green and Green | 9 |
An Aspect with the Value of 15 will enable all Bulbs.
Now we can make the following Settings
Interface
- Set the Interface ID and Bus according to your needs.
- In our examble we use Port 9 on the first Module. So the Address is 9.
- Set Control to Aspect numbers.
- Set Type to LED
Details
- Set the number of Aspects to 4.
- Set the Prefix and check use Prefix, if you need it.
- Set the pattern as calculated above.
SBB Distant Signal 4 Bulbs
Aspect Values
Aspect | Bulbs | Aspect Value |
---|---|---|
0 | Orange and Orange | 3 |
1 | Green and Green | 12 |
2 | Orange and Green | 9 |
3 | Orange, Green and Green | 13 |
Blank | - | 65535 |
An Aspect Value of 65535 will disable all Bulbs.
Interface
Details
SBB Departure Signal and Brake Test Signal
Aspect Values
Aspect | Bulbs | Aspect Value | Description |
---|---|---|---|
0 | - | 65535 | |
1 | White | 1 | Initiate braking |
2 | White(1) and White(4) | 5 | Magnetic disc brake |
3 | White(2) and White(4) | 6 | Release brake |
4 | All White Bulbs | 7 | Brakes are alright |
5 | Train Departure | 9 | Train Departure |
Interface
Details
rocnet/rocnetnode-led-signal-examples-en.txt · Last modified: 2019/01/03 00:07 by rainerk