no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== BiDiB ======
+[[:english#command_stations|{{  :interface.png}}]][[:english|{{  :rocrail-logo-35.png}}]]
+[[:english|Content]] -> [[:english#command_stations|Command Stations]] ->  **[[:bidib-en|BiDiB]]**
+  * [[:bidib:bidib-config-en|Configuration]] | [[:bidib-examples-en|Setup examples]] | [[:bidib-usb-en|USB Mapping]] | [[:bidib-compat-en|OpenDecoder]]
+  * [[:powerman-en|Power Manger]] | [[:rocrailini-automode-en#use_bi-directional_communication|BiDi Server Option]] | [[: loc-gen-en#code|Loco Code]]
+[[:bidib-de|{{  icons:de.png|Deutsche Version}}]][[:bidib-en|{{  icons:uk.png|English Version}}]][[:bidib-fr|{{  icons:fr.png|Version Française}}]]
+ \\
+===== Addressing =====
+The addressing is linear: __**[[:addressing-en#flat_accessory_decoder_address_fada|FADA]]**__\\
+Only the Bus(ID) and the Address fields are used.\\
+| Addressing starts in Rocrail with one; Null is not used. \\ Port zero on the LC is in Rocrail address one. |\\
+====Mapping====
+^ BiDiB Port ^ Rocrail Address ^ Rocrail Port ^
+| 0 | 1 | 0 |
+| 1 | 2 | 0 |
+| ... | ... | 0 |
+| 127 | 128 | 0 |
+ \\
+if sensor and input types at the same board exist the sensor range is 1 .. 128 and the input types are at 201 .. 328.\\
+**Tip:** Use the [[:sensormon-en|Sensor Monitor]] to find the right address.\\
+===== Important Options=====
+====Railcom====
+  * [[:rocrailini-automode-en#use_bi-directional_communication|BiDi Server Option]]
+  * [[: loc-gen-en#code|Loco Code]]
+  * [[rocrailini-automode-en#create_guest_on_bidi|Create guest Loco on BiDi]]
+ \\
+===== Features =====
+  * Easy **[[:bidib:bidib-config-en|Configuration]]**
+  * Current sense occupancy detection.
+  * RailCom(r) detection; Rocrail **[[loc-gen-en#code|Code]]**.((Max. 4 in the same section.))
+  * RailCom(r) KM/H.
+  * Read/Write CV's on the main, POM, reported by RailCom(r) mobile decoders.
+  * CV Programming on the service track. (No hardware available yet.)
+  * Loco control; velocity, functions...
+  * BiDiB & DCC Accessory control.
+  * All port types and macros.
+  * DCC [[http://www.bidib.org/protokoll/bidib_command_station.html#T452|Watchdog support]].
+  * External throttle support. (MultiMaus, LH90, LH100)
+  * **[[:powerman-en|Booster control.]]**
+  * Booster diagnostics [[:rocgui-gen-en#booster_uid|{{:bidib:bidib-diagnostic.png}}]]
+{{:bidib:bidi-kmh.png}}{{:bidib:powerctrl-en.png}}
+^Color^Value^Range^
+|Cyan|Voltage|0...24V|
+|Red|Temperature|0...100°C|
+|White|Current|Auto scaled; "mA max." is 100%|
+ \\
+===== Setup =====
+==== Adding a bidib controller ====
+{{:bidib:bidib-add-controller.png}}\\
+==== General ====
+{{:bidib:bidib-setup-gen-en.png}}\\
+=== Interface ID ===
+IID for addressing this interface directly from without Rocrail.\\
+ \\
+=== Device ===
+==Windows==
+Device name of the RS232 port.\\
+Typically COMx for Windows; Check the device manager.\\
+==Linux==
+The FDTI is supported out of the box: use /dev/ttyUSBx for Linux based systems.\\
+See also **[[:bidib-usb-en|USB Mapping]]**.\\
+==Mac OS X==
+For Mac OS X the FDTI device driver must be installed: **[[:mac-en#usb_to_serial_driver|USB to Serial]]**.\\
+After install and connecting the GBMBoost Master a new serial device is found under "/dev/tty.*".\\
+If the productID is not factory standard follow this setup: **[[opendcc:opendcc-usb-en#mac_os_x|OpenDCC USB Setup]]**\\
+==Links==
+  * http://www.opendcc.de/elektronik/usb/opendcc_usb.html
+  * Reset Product ID to factory settings: http://wiki.fichtelbahn.de/doku.php?id=interface_treiber :-\
+ \\
+===Host===
+Host name or IP address.\\
+===Port===
+TCP port.\\
+=== Baudrate ===
+Communication speed in Bits Per Second.\\
+The current version of the GBMBoost supports **115200** only.\\
+=== CTS ===
+Hardware handshake CTS/RTS.\\
+__Disable handshake only if the hardware does not support it.__ \\
+=== Sub-Library ===
+  * Serial (USB)
+  * TCP: __**[[:mbus:canservice-en#bidib|CANService]]**__ (Ethernet)
+  * NetBiDiB (Tams mc2)
+ \\
+==== Options ====
+{{:bidib:bidib-setup-options-en.png?600}}\\
+=== Secure ACK ===
+==Activate==
+To activate the [[http://www.bidib.org/protokoll/bidib.html#T61|secure ACK]] option of the BiDiB protocol.\\
+== Interval ==
+The [[http://www.bidib.org/protokoll/bidib.html#T61|secure ACK]] interval in 10ms units. 20 is the default. (200ms)\\
+If Rocrail did not send an ACK with in this time frame the event will be resend by the sensor unit.\\
+===Reset manually operated accessories===
+If a manually operated accessory is reported, as error, Rocrail will try to reset it back to its last known state.
+ \\
+=== Report absent ===
+If this option is activated, it will be reported if a loco ID is no longer recognized by a RailCom detector.
+  \\
+=== Query inputs ===
+Query also inputs at "Start of Day".\\
+Only modules which are reporting number of inputs > 0 and using the Flat port model.\\
+===Wizard===
+The TCP Port for the BiDiB-Wizard.\\
+If multiple masters are connected to this computer, every library must have its own unique port.\\
+  \\
+=== Watchdog ===
+The **[[http://www.bidib.org/protokoll/bidib_command_station.html#T452|Watchdog Feature]]** will be automatically checked at startup.\\
+ \\
+==== Nodes ====
+{{:bidib:bidib-nodes-en.png}}\\
+This node overview list will be automatically generated during the connection setup between Rocrail and the BiDiB interface.\\
+===Configure===
+Read the __**[[:bidib:bidib-config-en|Configuration]]**__ page for more information on node configuration.\\
+ \\
+====Cable====
+  * [[http://en.wikipedia.org/wiki/Category_5_cable|CAT 5]] Twisted pair cable. (AKA Ethernet patch cable)
+ \\
+=====Multi RailCom detection=====
+To be able to detect multiple Railcom decoders in the same section the following option must be set:\\
+  * __**[[:rocrailini-automode-en#send_zero_speed_command_at_power_on|Send zero speed command at power on]]**__
+ \\
+=====IRM Location Reports=====
+The reported Location ID must mach with a __**[[:sensor-gen-en#id|Sensor-ID]]**__ in Rocrail.\\
+This sensor should have its address set to zero.\\
+The reporting address is used for the sensor __**[[:loc-gen-en#code|Code]]**__.\\
+IRM only reports arrival and not depart, so for automatically reset use the __**[[:sensor-gen-en#timer|Sensor Timer]]**__.\\
+ \\
+=====Automatic mode=====
+It is recommended __**not to add or remove BiDiB modules**__ to/from the bus in automatic mode because this will cause a lot of communication traffic and leads to strong delayed events.\\
+The track power will be shut off in case a module is reported as 'lost'.\\
+ \\
+=====Programming Track (PT)=====
+Starting with firmware 2.1.4 the GBMBoost Master can be used as Programming Track.\\
+Before programming on the PT the PT-Mode must be set, see the __**[[:pt-en#pt|PT Button]]**__ on the Programming Tab.\\
+ \\
+=====BiDiB Wizard=====
+The Wizard can be connected to TCP port 62875 to configure nodes.\\
+The [[:rocgui-menu-en#enable_communication|Communication must be disabled]] before port 62875 will be serviced.\\
+ \\
+=====netBiDiB / BiDiB Broker=====
+{{ :tams:mc2-setup-en.jpg?320}}
+The netBiDiB communication is available on port 62875.\\
+Automatic discover is not supported\\
+===Pairing UID===
+The Rocrail pairing UID is fixed and is as followed assembled:
+<code>UID = (IANA-PEN << 32) + (IANA-PORT << 16) + (NMRA-VID)</code>
+{{:bidib:broker-b.jpg?400}}\\