no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== BiDiB ======
+{{  :rocrail-logo-35.png}}
+[[dutch|Inhoud]] -> [[dutch#Fabrikanten van centrales en overige componenten|Fabrikanten   ]]
+ \\
+[[http://www.bidib.org/|{{http://www.bidib.org/pics/bidib_logo.png?200|BiDiB, ein universelles Steuerprotokoll für Modellbahnen}}]]{{http://www.fichtelbahn.de/images/gbm_gespann_produktbild1.jpg?200}}\\
+ \\
+===== Algemene informatie=====
+{{ http://www.opendcc.de/bidib/overview/bidib_system.png?400}}
+BiDiB is een nieuw protocol dat P&P ondersteunt op een hoog betrouwbaarheids nivo.\\
+Kijk voor meer informatie op: http://bidib.org/ \\
+ \\
+===== Geschikt voor =====
+  * Stroomdetectie melders  .
+  * RailCom detectie; Rocrail **[[loc-gen-en#identifier|Identifier]]**.
+  * Leest CV waarden on the main  van Railcom loc decoders  .
+  * Loc besturing, snelheid, functies .....
+  * Besturing randapparatuur
+  * CV's programmeren   .
+  * Boosters aansturen.
+ \\
+===== Setup =====
+==== General ====
+{{:bidib:bidib-setup-gen-en.png}}\\
+=== Interface ID ===
+IID for addressing this interface directly from without Rocrail.
+=== Serial Port ===
+Device name of the RS232 port.\\
+Typically COM1, COM2, COM? for Windows, and /dev/ttyS0. /dev/ttyS1, /dev/ttyUSB0 for Linux based systems.
+=== Baudrate ===
+Communication speed in Bits Per Second.\\
+=== Sub-Library ===
+  * Serial (USB)
+==== Options ====
+{{:bidib:bidib-setup-options-en.png}}\\
+=== Secure ACK ===
+==Enable==
+To enable the [[http://www.bidib.org/protokoll/bidib.html#T61|secure ACK]] option of the BiDiB protocol.\\
+== Interval ==
+The [[http://www.bidib.org/protokoll/bidib.html#T61|secure ACK]] interval in 10ms units. 20 is the default. (200ms)\\
+If Rocrail did not send an ACK with in this time frame the event will be resend by the sensor unit.\\
+==== Nodes ====
+{{:bidib:bidib-nodes-en.png}}\\
+This node overview list will be automatically generated during the connection setup between Rocrail and the BiDiB interface.\\
+===Configure===
+Read the __**[[:bidib:bidib-config-en|Configuration]]**__ page for more information on node configuration.\\
+ \\
+===== Hardware =====
+{{:bidib:gbmboost.png}}{{:bidib:lightcontrol.png}}\\
+  * [[http://opendcc.de/bidib/overview/overview.html|Overview]]
+  * **GBMboost** [[http://opendcc.de/elektronik/gbmboost/gbmboost.html|Command Station and Booster]]
+  * ** GBM16T** [[http://opendcc.de/s88/gbm_bidi/gbm_bidi.html|RailCom detection]] (Current sense and RailCom)
+  * **LightControl** [[http://opendcc.de/elektronik/lightcontrol1/lightcontrol.html|Light control]] (LEDs, I/O, Servos...)
+  * [[http://www.fichtelbahn.de/shop/|{{http://www.fichtelbahn.de/shop/img/logo.jpg?100}}]][[http://www.fichtelbahn.de/shop/|Fichtelbahn Shop]]
+ \\
+====Cable====
+CAT-5\\
+[[http://www.fichtelbahn.de/gbmboost_interface.html|{{http://www.fichtelbahn.de/images/bidib_topology_full.jpg?400}}]]\\
+ \\
+===== Links =====
+  * [[http://opendcc.de/forum.html|Forum]]
+  * [[http://tech.groups.yahoo.com/group/BiDiB-Implement/|Yahoo Group "BiDiB-Implement"]]
+  * [[http://www.bidib.org/protokoll/intro.html|Protocol]]