no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== CAN-digital-Bahn ======
+[[:english#command_stations|{{  :interface.png}}]][[:english|{{  :rocrail-logo-35.png}}]]
+[[english|Content]] -> [[english#command_stations|Command Stations]] ->  CAN-digital-Bahn
+ \\
+=====CC-Schnitte V2=====
+This version uses the Märklin CS2 CAN protocol.\\
+[[http://www.can-digital-bahn.com/modul.php?system=sys5|{{http://www.can-digital-bahn.com/pages/module/CC_Schnitte/images/CC_Schnitte_2_1_klein.jpg?200}}]]\\
+====Setup====
+Set it up as a **[[:mbus:cs3-en|Märklin CS2/CS3]]** CS with type serial.\\
+Read also: __**[[:mbus:mbus-en|MBUS & TrackBox]]**__\\
+ \\
+===Device===
+The serial device like COM3 under Windows or /dev/ttyUSB0 under Linux.\\
+===Type===
+Serial.\\
+===Baudrate===
+.\\
+===CTS===
+Hardware flow control with CTS.\\
+===Version===
+The version should be set to 2 to disable S88 polling continually.\\
+====Command Pause====
+This is for special CS2 compatible Command Stations which can not handle high data traffic.\\
+This sleep value will also be used for waiting on the next byte. (In some cases needed under Mac OSX: 17...20ms)\\
+Use **17 ms**.
+ \\
+=====Gleisreporter deLuxe=====
+See for special support: __**[[:cs2:cs2-en#sensor_events|Sensor events]]**__\\
+ \\
+=====Links=====
+  * http://www.can-digital-bahn.com
+ \\
+=====CC-Schnitte V1 (Deprecated)=====
+{{http://www.can-digital-bahn.com/pages/module/CC_Schnitte/images/CC-Schnitte%20nur%20Platine_klein.jpg?200}}\\
+Setup as Lenz **[[:xpressnet-en|XpressNet]]** CS.\\
+  * LI101F
+  * 19200, CTS
+  * V2