Status Light

Content → Rocview → General

• Configuration | Locomotives Tab | Accelerators | Status Light | Use multiple Gui's for viewing | Reports

What do the status lights (bulbs) indicate.

• Green = OK or active.

Note: The definition is also displayed with the mouse pointer on the lamp as a tool tip.

• The startup track plan health status.
  In case of red check the Rocrail server trace e.g. in the Trace filter

• Global track power.

• Command Station Connection
• The RS232 or TCP/IP successfully initialized and connected.

• Sensor system
• Ready for processing Sensor report events.
• mcs2: The sensor state will be green after the first sensor/s88 event has been received in case polling is disabled.

• Accessory system
• Ready for controlling accessory decoders.

• Ready to run trains in auto mode.

• Init field is ready. This lamp is green after Rocview is started, and will go red on the Init Field command.

Not all command stations report a separate status for sensor and accessory systems and will remain red.