User Tools

Site Tools


bidib-nl

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

bidib-nl [2018/11/12 08:56] (current)
Line 1: Line 1:
 +====== BiDiB ======
 + 
 +{{  :​rocrail-logo-35.png}}
  
 +[[dutch|Inhoud]] -> [[dutch#​Fabrikanten van centrales en overige componenten|Fabrikanten ​  ​]]  ​
 + \\
 +[[http://​www.bidib.org/​|{{http://​www.bidib.org/​pics/​bidib_logo.png?​200|BiDiB,​ ein universelles Steuerprotokoll für Modellbahnen}}]]{{http://​www.fichtelbahn.de/​images/​gbm_gespann_produktbild1.jpg?​200}}\\
 + \\
 +
 +===== Algemene informatie=====
 +{{ http://​www.opendcc.de/​bidib/​overview/​bidib_system.png?​400}}
 +BiDiB is een nieuw protocol dat P&P ondersteunt op een hoog betrouwbaarheids nivo.\\  ​
 +Kijk voor meer informatie op: http://​bidib.org/​ \\
 +
 + \\
 +
 +===== Geschikt voor =====
 +  * Stroomdetectie melders ​ .
 +  * RailCom detectie; Rocrail **[[loc-gen-en#​identifier|Identifier]]**.
 +  * Leest CV waarden on the main  van Railcom loc decoders ​ .
 +  * Loc besturing, snelheid, functies .....  ​
 +  * Besturing randapparatuur  ​
 +  * CV's programmeren ​  .
 +  * Boosters aansturen.
 +
 +
 + \\
 +
 +===== Setup =====
 +==== General ====
 +{{:​bidib:​bidib-setup-gen-en.png}}\\
 +=== Interface ID ===
 +IID for addressing this interface directly from without Rocrail.
 +=== Serial Port ===
 +Device name of the RS232 port.\\
 +Typically COM1, COM2, COM? for Windows, and /dev/ttyS0. /dev/ttyS1, /​dev/​ttyUSB0 for Linux based systems.
 +=== Baudrate ===
 +Communication speed in Bits Per Second.\\
 +=== Sub-Library ===
 +  * Serial (USB)
 +
 +==== Options ====
 +{{:​bidib:​bidib-setup-options-en.png}}\\
 +=== Secure ACK ===
 +==Enable==
 +To enable the [[http://​www.bidib.org/​protokoll/​bidib.html#​T61|secure ACK]] option of the BiDiB protocol.\\
 +== Interval ==
 +The [[http://​www.bidib.org/​protokoll/​bidib.html#​T61|secure ACK]] interval in 10ms units. 20 is the default. (200ms)\\
 +If Rocrail did not send an ACK with in this time frame the event will be resend by the sensor unit.\\
 +==== Nodes ====
 +{{:​bidib:​bidib-nodes-en.png}}\\
 +This node overview list will be automatically generated during the connection setup between Rocrail and the BiDiB interface.\\
 +===Configure===
 +Read the __**[[:​bidib:​bidib-config-en|Configuration]]**__ page for more information on node configuration.\\
 +
 + \\
 +
 +
 +
 +===== Hardware =====
 +{{:​bidib:​gbmboost.png}}{{:​bidib:​lightcontrol.png}}\\
 +  * [[http://​opendcc.de/​bidib/​overview/​overview.html|Overview]]
 +  * **GBMboost** [[http://​opendcc.de/​elektronik/​gbmboost/​gbmboost.html|Command Station and Booster]]
 +  * ** GBM16T** [[http://​opendcc.de/​s88/​gbm_bidi/​gbm_bidi.html|RailCom detection]] (Current sense and RailCom)
 +  * **LightControl** [[http://​opendcc.de/​elektronik/​lightcontrol1/​lightcontrol.html|Light control]] (LEDs, I/O, Servos...)
 +  * [[http://​www.fichtelbahn.de/​shop/​|{{http://​www.fichtelbahn.de/​shop/​img/​logo.jpg?​100}}]][[http://​www.fichtelbahn.de/​shop/​|Fichtelbahn Shop]]
 +
 +
 + \\
 +====Cable====
 +CAT-5\\
 +[[http://​www.fichtelbahn.de/​gbmboost_interface.html|{{http://​www.fichtelbahn.de/​images/​bidib_topology_full.jpg?​400}}]]\\
 +
 +
 +
 + \\
 +===== Links =====
 +  * [[http://​opendcc.de/​forum.html|Forum]]
 +  * [[http://​tech.groups.yahoo.com/​group/​BiDiB-Implement/​|Yahoo Group "​BiDiB-Implement"​]]
 +  * [[http://​www.bidib.org/​protokoll/​intro.html|Protocol]]
bidib-nl.txt · Last modified: 2018/11/12 08:56 (external edit)