User Tools

Site Tools


known_switch_coils_and_their_technical_details

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
known_switch_coils_and_their_technical_details [2018/11/12 08:56]
127.0.0.1 external edit
known_switch_coils_and_their_technical_details [2020/04/15 14:00] (current)
phg
Line 17: Line 17:
 In case of any doubts, always refer to the original manual of your turnouts.\\ In case of any doubts, always refer to the original manual of your turnouts.\\
 To be more accurate the voltage is indicated which is used for measuring the current.\\ To be more accurate the voltage is indicated which is used for measuring the current.\\
 +If your coils are not listed here, it is also possible to calculate the current you need.\\
 +To do that you need to know the voltage which is supllied to the coil.\\
 +Pleas remind this is not the voltage of the transformer,​ but the voltage directly measured ewehere the coil is to be connected.\\
 +And second measure the resistance otf the coil.\\
 +According to Ohm's law:\\
 +(Volt / resistance) is  the current that will be passing the coil.\\
 +Example:  ​
 +The voltage = 18V ,  the resistance = 36 Ohm.\\
 +Then we have 18/36 = 0,5 ampere.\\
 +
 + 
  
 ^  Mark  ^  type #  ^  Testvoltage ​ ^  current ​ \\  ( in amps)  ^  Ohms  ^  remarks ​ ^  Useable with  ^ ^  Mark  ^  type #  ^  Testvoltage ​ ^  current ​ \\  ( in amps)  ^  Ohms  ^  remarks ​ ^  Useable with  ^
 |  Märklin ​ |  C-rails all types |  18V  |  >​1,​2 ​ |  11 Ohm  |  the best idea here is to remove switches inside ​ \\  solonoid drive. The installed switch can handle only 0.5 Amp \\  see specs : [[http://​www.produktinfo.conrad.com/​datenblaetter/​700000-724999/​705622-da-01-de-ULTRAMINIATUR_DH2C_B1PA_0_5A_30V.pdf|microswitch]] ​ |  GCA76  | |  Märklin ​ |  C-rails all types |  18V  |  >​1,​2 ​ |  11 Ohm  |  the best idea here is to remove switches inside ​ \\  solonoid drive. The installed switch can handle only 0.5 Amp \\  see specs : [[http://​www.produktinfo.conrad.com/​datenblaetter/​700000-724999/​705622-da-01-de-ULTRAMINIATUR_DH2C_B1PA_0_5A_30V.pdf|microswitch]] ​ |  GCA76  |
 |  Märklin ​ |  K-rails 7549 |  18V  |  1,2  |  15 Ohm  |  |  GCA76  | |  Märklin ​ |  K-rails 7549 |  18V  |  1,2  |  15 Ohm  |  |  GCA76  |
-|  Märklin ​ |  M-rails ​ |  18V  |  0,5  |  32 Ohm  |  |  GCA77/​GCA76 ​ |+|  Märklin ​ |  M-rails ​ |  18V  |  0,5  |  32 Ohm  |  |  GCA77  |
 |  Roco  |  61195  |  18V  |  1  |  17 Ohm  |  |   ​GCA76 ​ |  ​ |  Roco  |  61195  |  18V  |  1  |  17 Ohm  |  |   ​GCA76 ​ |  ​
 |  Fleischmann ​ |  6421  |  18V  |  0,9  |  17 Ohm |  |  GCA76  | |  Fleischmann ​ |  6421  |  18V  |  0,9  |  17 Ohm |  |  GCA76  |
 +|  Fleischmann ​ |  640000 ​ |  ?  |  ?  |  ? Ohm |  |  GCA?  |
 |  Fleischmann Piccolo ​ |  9182  |  16V  |  0,9  |  14 Ohm  |  |  GCA76  | |  Fleischmann Piccolo ​ |  9182  |  16V  |  0,9  |  14 Ohm  |  |  GCA76  |
 |  Trix  |  Minitrix 14971  |  16V  |  1,2  |  7 Ohm  |  When sufficient 12V supply is used   ​\\ ​ possible with GCA77  |  GCA77/​GCA76 ​ | |  Trix  |  Minitrix 14971  |  16V  |  1,2  |  7 Ohm  |  When sufficient 12V supply is used   ​\\ ​ possible with GCA77  |  GCA77/​GCA76 ​ |
 |  Tillig ​ |  HO scale  |  18V  |  0,6  |  23 Ohm  |  |  GCA76  |  |  Tillig ​ |  HO scale  |  18V  |  0,6  |  23 Ohm  |  |  GCA76  | 
known_switch_coils_and_their_technical_details.1542009373.txt.gz · Last modified: 2018/11/12 08:56 by 127.0.0.1