Traverser Setup
Rendering
- The size of the traverser is fixed: 4 x 8 grid cells. (32*4=128, 32*8=256)
- On both long sides is room for 8 tracks.
- No tracks will be shown in the SVG because the traverser connects directly to normal track symbols.
- SVG symbol. It is split up in two symbols: Table and the bridge in white, yellow, blue and red.
Setup
Assuming tracks 00-07 can be different positioned against 24-31:
North
+----------+
00 ==|..........|== 24
01 ==|..........|== 25
02 ==|..........|== 26
03 ==|]========[|== 27
04 ==|..........|== 28
05 ==|..........|== 29
06 ==|..........|== 30
07 ==|..........|== 31
+----------+
South
Track number 63 will be used for calibration.
Automatic
If a loco wants to run from track 03 to 27 the bridge must set first to track 03, and after the loco is completely on the bridge track 27 should be set.