This is an old revision of the document!
Table of Contents
Uhlenbrock 68610 Lissy
Informatie
Alleen de basis functies van de Lissy ontvanger kunnen met dit scherm worden geprogrammeerd. Alle andere functies zijn binnen Rocrail niet van belang.
Lissy is een van de vele BiDi oplossingen. Kijk vor meer info op : Bi-Directionele Communicatie
Notice
Before start programming, make sure the Lissy receiver is the only connected module of its kind currently connected to the LocoNet; the Uhlenbrock defined packets do not regard module addressing.
Dialog
Address 1
Reporting address of the first IR sensor, which is also the module address.
Address 2
Reporting address of the second IR sensor in single reporting mode.
Reporting
double | both sensors are used for one event message which includes the train velocity |
single | an event is generated for both sensors separately without velocity info |
Scale
Only enabled for double sensor reporting.
The scale/gauge for calculating the velocity.
Sensor gap
Only enabled for double sensor reporting.
The distance between the two sensors in mm.