User pages → Rob Versluis
Size: 2000 x 546 x 125 (mm)
Material: 12mm Multiplex, Birch
Date of building start: xx-xx-2008
|Quantity||Length (mm)||Width (mm)|
*Adjust width to your needs to reduce weight. I took 320mm for this module. The 4mm gap is filled out with 4mm cork plates.
I call it Fremo 'Light' because I reduced the profile height from 195mm to 125mm, but still compatible with the 2E96. On the south and north side of the module I will make 'windows' to reduce the weight without loosing stabillity.
|The parts are only set together, nothing constructed jet.||The result of working on the module skeleton for one day.|
|Offset correction from 59mm Tillig raster to 46mm NEM. I used track sections of R4 which has a radius of 543mm, and the total length of the correction is 160mm.||This module will become "Bahnhof Waldbrunn". (Faller 110099)|
|The levers for converting servo movement into switch settings.||All servo's are prepared for mounting under the module.|
|Mounted servo.||With a servo tester you can check the servo before mounting it and afterwards the switch movements.|