This is an old revision of the document!
Table of Contents
Massoth DiMAX
Caractéristiques
- Voie de programmation
- Programming On the Main Programmation sur la voie principale
Configuration
Sélectionner "massoth" comme Centrale Numérique à partir de la liste dans la Fenêtre de dialogue Rocrail.
Port Série
La vitesse de transmission est fixée à 57600 et l'établissement de la liaison est CTS.
Les autres réglages sont ignorés.
Détecteurs
Les reports de contacts occupées -a- et les reports de contacts libre -b- sur la même adresse.
Reset
Avec cette option les contacts -a- et -b- sont utilisées séparément et seront remis à zéro automatiquement après 2500ms.
System info
Option for showing the actual system load.
Overrule throttle
Deselect the throttle from the loco.
Echo commands
Echo switch commands.
Loco setup
Function control
To adjust the way functions are controlled the protocol_version must be set accordingly:
- Parallel → 1 (default)
- Serial → 2
Addressing
Switches
Flat: Address field.
The port field is not used.
Server info
The server trace shows the currently active options set:
20101020.174716.708 r9999I main OMassoth 0978 ---------------------------------------- 20101020.174716.708 r9999I main OMassoth 0979 Massoth 2.0.0 20101020.174716.708 r9999I main OMassoth 0980 ---------------------------------------- 20101020.174716.708 r9999I main OMassoth 0981 iid = vcs-1 20101020.174716.708 r9999I main OMassoth 0982 device = /dev/tty.PL2303-00001004 20101020.174716.708 r9999I main OMassoth 0983 baudrate = 57600 (fix) 20101020.174716.708 r9999I main OMassoth 0984 reset sensors = no 20101020.174716.708 r9999I main OMassoth 0987 system info = yes 20101020.174716.708 r9999I main OMassoth 0988 ----------------------------------------