User Tools

Site Tools


Tams Easy Control

InhoudCentral StationsTams Easy Control



In the sensor part you can set the number of connected s88 modules and how to scan for changes.


Define here the number of 8 port connected modules. Some modules have 16 ports, so you have to multiply it by two in that case.


Setting this flag will poll in the p50 way for sensor events every 200 ms.

Programming Track

Normally you should set this flag, but in case of the Tams Easy Control you should not when using the p50x protocol. This is a work around for the xEvtPT problem documented as tracker issue: Or update the firmware with the hex code attached to the tracker.

p50x-tams-nl.txt · Last modified: 2018/11/12 08:56 by