The Virtual CS is the default configuration when no other interface is defined.
This library prevents confronting the novice user with communication issues at first start, and is a tool for testers and developers to 'run' without damaging loco's.
Don't forget to give the sensors an address, otherwise Rocrail goes wrong in the simulation mode.
|A server restart is needed to activate.|
20120827.144830.646 r9999I cmdr7000 OVirtual 0268 simulate fb addr=5 state=true 20120827.144830.654 r9999c vcs-1 OVirtual 0442 new timed command time=1903 delay=20 tick=1904 20120827.144830.845 r9999c vcs-1 OVirtual 0450 timed command 20120827.144830.845 r9999I vcs-1 OVirtual 0460 simulate fb addr=5 state=false
If the "Overrule throttle" option is set field events will be generated for speed and function commands.
If the Version is set to 2 the sensor generator will be started after restart and power on.
With a power off command the generator will pause.
Sensor addresses are picked randomly.
The frequency of generating events is 1 second.
The used address range is the number of sensor modules * 8. (One is used if set to zero.)
The sensor offset is added to the generated random address.
The timeout value is used as interval; Default 1000ms.
A random CV get value will be generated in case this option is set.
Otherwise the previous CV set value will used for CV get.
CV get values will be send twice to emulate Railcom POM decoders.
This option is for developers only In all other cases: Leave this field to zero.
|1||1000 random sensor events at SoD.|
|2||Sensor generator. (Random sensor events.)|
|3||Outputs are reported in MADA addressing scheme.|
|4||Do not echo switch and output commands.|