User Tools

Site Tools


arduino:wio-rascii-fr

WIO RASCII

Not to be translated.

RASCII documentation as used in WIO.

WIP


Overview

Frame

Header Data
Prefix Length OPC NID Data 0…120


Field Description Remark Size
Prefix Message type 1 char
Length OPC + NID + Data 2 char
OPC Operation Code Command/Event 2 char
NID Node ID 0…255, zero is broadcast 2 char
Data Optional data 0, 2, 4, …240 char


Binary Structure

Field Value Size
type Prefix character char
nid bin(NID) byte
opc bin(OPC) byte
dlc (bin(Length)/2) - 2 byte
data[120] Data bin(0)…bin(120) byte[120]


Example

RASCII:

$060C2101

Binary:

type=$
nid=31 (0x21)
opc=12 (0x0C)
dlc=1  (6/2 - 2)
data[0]=1


Constants

Prefixes

#define PREFIX_CMD '@'
#define PREFIX_EVT '$'
#define PREFIX_INF '#'
#define PREFIX_RSP '&'
#define PREFIX_TXT '/'

Commands

#define CMD_INFO        0
#define CMD_START       1
#define CMD_STOP        2
#define CMD_GETCONF     3
#define CMD_SETCONF     4
#define CMD_RESETCONF   5
#define CMD_GETCV       6
#define CMD_SETCV       7
#define CMD_DOUT        10
#define CMD_AOUT        11
#define CMD_ACCESSORY   12
#define CMD_MOBILE_DIRV 13
#define CMD_MOBILE_FUN  14
#define CMD_MOBILE_DISPATCH 15
#define CMD_MOBILE_RELEASE  16
#define CMD_EBREAK          17
#define CMD_SOD             18
#define CMD_QUERY           19
#define CMD_SETIDTYPE       20
#define CMD_SETWIO          21

#define CMD_SERVO           23
#define CMD_TEXT            24
#define CMD_CLOCK           25
#define CMD_SIGNAL          26
#define CMD_SWITCH          27
#define CMD_BINSTATE        28
#define CMD_MOBILE_SHORTID  29
#define CMD_CLEAR_SHORTIDS  30
#define CMD_END_SHORTIDS    31
#define CMD_SHUTDOWN        32
#define CMD_MOBILE_STATE    33
#define CMD_SOUND_PLAY      34
#define CMD_OTA             35
#define CMD_REBOOT          36
#define CMD_PT_ON           37
#define CMD_PT_OFF          38

Events

#define EVT_ALIVE 0
#define EVT_OCC   1
#define EVT_RFID  2
#define EVT_DIN   3
#define EVT_AIN   4
#define EVT_DSEN  5
#define EVT_ASEN  6
#define EVT_DOUT  7
#define EVT_ACCESSORY    8
#define EVT_SHORTCIRCUIT 9
#define EVT_BIDI         10
#define EVT_SENSORID     11
#define EVT_STATE        12
#define EVT_MOBILE_STATE 13
#define EVT_GOODBYE      255

BiDi type

#define BIDI_SETCV   0 // POM
#define BIDI_GETCV   1 // POM
#define BIDI_ADDRESS 2
#define BIDI_DYN     3
#define BIDI_EXT     4

Port type

#define PORTTYPE_DOUT  0
#define PORTTYPE_AOUT  1
#define PORTTYPE_SERVO 2


System

Commands

Prefix Length Code Data Example Description
PREFIX_CMD 4 CMD_START - "@040100" Global track power ON
PREFIX_CMD 4 CMD_STOP - "@040200" Global track power OFF
PREFIX_CMD 4 CMD_EBREAK - "@041100" Emergency break
PREFIX_CMD 4 CMD_SOD - "@041200" Start of Day
PREFIX_CMD 4 CMD_CLEAR_SHORTIDS - "@041E00" All WIO Controls should clear the locomotive list
PREFIX_CMD 4 CMD_END_SHORTIDS - "@041F00" End of new short ID broadcasting
PREFIX_CMD 4 CMD_SHUTDOWN - "@042000" Shutdown

Events

Prefix Length Code Data Example Description
PREFIX_EVT 6…22 EVT_STATE D0=state flags (0x01=globalpower), D1+D2=boosterID, D3+D4=current, D5+D6=volt, D7+D8=temp "$060Cnn01" Global track power state event


Mobile

Commands

Prefix Length Code Data Example Description
PREFIX_CMD 10 + ID-length * 2 CMD_MOBILE_SHORTID D0=addrH, D1=addrL, D2=dirF, D3=speed D4="shortID" "@121D0003800054657374" Publish a short ID ("Test", addr=3, forwards, lights off and V0 in the example.)
PREFIX_CMD 32 CMD_MOBILE_DIRV D0=bus, D1=addrH, D2=addrL, D3=dirV, D4=lights, D5=steps, D6=mass, D7=speed, D8=angle, D9=minstep, D10=maxstep, D11=throttleID, D12=automode, D13=pwmH, D14=pwmL "@200D210003807F0A000005604D000000" Direction and speed
PREFIX_CMD 22 CMD_MOBILE_FUN D0=bus, D1=addrH, D2=addrL, D3=Fchanged, D4=on/off, D5=lights, D6…D9=fx, D10=throttleID One changed function and state of all 32.
PREFIX_CMD 14 CMD_BINSTATE D0=bus, D1=addrH, D2=addrL, D3=binH, D4=binL, D5=state Change binary state for one port.
PREFIX_CMD 16 CMD_MOBILE_DISPATCH D0=bus, D1=addrH, D2=addrL, D3=V, D4=Lights, D5=fxH, D6=fxL Dispatch loco for throttle.
PREFIX_CMD 8 CMD_MOBILE_RELEASE D0=bus, D1=addrH, D2=addrL Release loco from throttle.


Signal

Commands

Prefix Length Code Data Example Description
PREFIX_CMD 18 CMD_SIGNAL D0=bus, D1=addr, D2=nraspects, D3=aspect, D4=valueH, D5=valueL, D6=brightness, D7=dim "@121A010403020007FF99" Set signal aspect.


Switch

Commands

Prefix Length Code Data Example Description
PREFIX_CMD 12 CMD_SERVO D0=bus, D1=addr, D2=paramon/off, D3=delay, D4=on/off Type: Servo
Parameter range: 0…180°
PREFIX_CMD 16 CMD_SWITCH D0=bus, D1=addrH, D2=addrL, D3=port, D4=gate, D5=value, D6=delay Type: Accessory + DCC
PREFIX_CMD 8 CMD_ACCESSORY D0=bus, D1=addr, D2=on/off Type: None Servo + Single gate
PREFIX_CMD 8 CMD_ACCESSORY D0=bus, D1=addr, D2=gate Type: None Servo + no single gate


Output

Commands

Prefix Length Code Data Example Description
PREFIX_CMD 12 CMD_DOUT D0=bus, D1=addr, D2=on, D3=delay, D4=blink -
PREFIX_CMD 12 CMD_SERVO D0=bus, D1=addr, D2=paramon/off, D3=delay, D4=on/off Type: Servo
PREFIX_CMD 6 + soundfile*2 CMD_SOUND_PLAY D0=bus, D1=paramon/off, D2…Dn=Soundfilename Type: Sound
PREFIX_CMD 18 CMD_AOUT D0=bus, D1=addr, D2=valueon, D3=red, D4=green, D5=blue, D6=blink+delay, D7=paramon Type: LED + Color
PREFIX_CMD 22 CMD_MOTOR D0=bus, D1=addr, D2=dirT, D3=delay, D4=stepsH, D5=stepsM, D6=stepsL, D7=reportH, D8=reportM, D9=reportL Type: Motor
dirT&0x80=direction, dirT&0x40=calibrate, dirT&0x3F=cancel


Text

Commands

Prefix Length Code Data Example Description
PREFIX_TXT 6 + textlength*1 CMD_TEXT D0=bus, D1=display, D2…Dn=text The text is not in HEXA, max 250 length.


Clock

Commands

Prefix Length Code Data Example Description
PREFIX_CMD 8 CMD_CLOCK D0=hour, D1=minute, D2=brightness


Program

Commands

Prefix Length Code Data Example Description
PREFIX_CMD 2 CMD_QUERY Query all WIO modules.
PREFIX_CMD 4 CMD_OTA D0=bus Put a WIO module in OTA mode for firmware update.
PREFIX_CMD 8 + nodename*2 CMD_SETIDTYPE D0=bus, D1=ID , D2=config, D3…Dn=nodename D1 is the new WIO ID number, and config determines the WIO type.
PREFIX_CMD 4 CMD_REBOOT D0=bus Reboot the selected WIO module.
PREFIX_CMD 16 + configlength*2 CMD_SETWIO D0=bus, D1=I/O-index, D2=pulselength, D3=option1, D4=options2, D5=steps, D6=deepsleep, D7…Dn=I/O-configstring Configure the WIO module.
PREFIX_CMD 12 CMD_GETCV D0=bus, D1=addrH, D2=addrL, D3=cvH, D4=cvL, D5=options options: bit0=PT, bit1=accessory
Default POM Mobile.
PREFIX_CMD 14 CMD_SETCV D0=bus, D1=addrH, D2=addrL, D3=cvH, D4=cvL, D5=value, D6=options

Responses

Prefix Length Code Data Example Description
PREFIX_RSP 42 CMD_QUERY D0=bus, D1=type, D2=manu, D3=pid, D4=vmaj, D5=vmin, D6=options1, D7=battery/load, D8=rssiH, D9=rssiL, D10=tempH, D11=tempL, D12=pressH, D13=pressL, D14=humH, D15=humL, D16=options2, D17=steps, D18=deepsleep, D19=pulse


Events

Prefix Length Code Data Example Description
PREFIX_EVT 16 EVT_GOODBYE D0=bus, D1=analogH, D2=analogL, D3=rssiH, D4=rssiL, D5=locoH, D6=locoL WIO Control in pause or low battery.
PREFIX_EVT 6 EVT_SHORTCIRCUIT D0=bus, D1=shortcircuit WIO Boost/Drive reports overload.
PREFIX_EVT 32 EVT_ALIVE D0=bus, D1=analogH, D2=analogL, D3=rssiH, D4=rssiL, D5=locoH, D6=locoL, D7=tempH, D8=tempL, D9=temp100H, D10=temp100L, D11=pressH, D12=pressL, D13=humH, D14=humL
PREFIX_EVT 8 EVT_DIN D0=bus, D1=port, D2=value Digital input.
PREFIX_EVT 8 EVT_DOUT D0=bus, D1=port, D2=value Digital output.
PREFIX_EVT 10 EVT_ACCESSORY D0=bus, D1=port, D2=value, D3=Port type In case of servo type the value is in degrees.
PREFIX_EVT 16 EVT_BIDI D0=bus, D1=port, D2=locoH, D3=locoL, D4=BiDi type, D5=index, D6=value
PREFIX_EVT 8 + rfidlen*2 EVT_RFID D0=bus, D1=port, D2=len, D3…Dn=RFID Stationary sensor; Must be confirmed.
PREFIX_EVT 8 + rfidlen*2 EVT_SENSORID D0=bus, D1=port, D2=len, D3…Dn=RFID Mobile sensor; Must be confirmed.


C Code

typedef struct RASCIIFrame {
  char type;
  byte opc;
  byte nid;
  byte dlc;
  byte data[120];
} *iRASCIIFrame;
 
static byte _HEXA2Byte( const char* s ) {
  /*                    0  1  2  3  4  5  6  7  8  9  :  ;  <  =  >  ?  @  A   B   C   D   E   F */
  static char hexb[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 0, 0, 10, 11, 12, 13, 14, 15};
  return (hexb[s[0] - 0x30] << 4) + hexb[s[1] - 0x30];
}
 
 
static char* _Byte2HEXA(byte b, char* c) {
  static char cHex[] = {'0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'};
  c[0] = cHex[(b&0xF0)>>4];
  c[1] = cHex[ b&0x0F    ];
  c[2] = '\0';
  return c;
}
 
 
static int _encode( iRASCIIFrame frame, char* rascii) {
  int idx = 0;
 
  // Type @,#,$,&,/
  rascii[0] = frame->type;
  idx++;
 
  if( frame->dlc > 120 ) {
    TraceOp.trc( "RASCII", TRCLEVEL_WARNING, __LINE__, 9999, "encode: invalid length of %d (max. 120)", frame->dlc );
    return -1;
  }
 
  // Length = opc + rid + data
  _Byte2HEXA((frame->dlc + 1 + 1) * 2, rascii + idx);
  idx+=2;
 
  // Command, Event
  _Byte2HEXA(frame->opc, rascii+idx);
  idx+=2;
 
  // Recipioent ID
  _Byte2HEXA(frame->nid, rascii+idx);
  idx+=2;
 
  // Data
  if( frame->dlc <= 120 ) {
    for( int i = 0; i < frame->dlc; i++ ) {
      _Byte2HEXA(frame->data[i], rascii+idx);
      idx+=2;
    }
  }
  rascii[idx+0] = '\n';
  rascii[idx+1] = '\0';
  idx++;
 
  return idx;
}
 
 
static char _decode( const char* rascii, iRASCIIFrame frame ) {
  int idx = 0;
  frame->type = rascii[0];
  idx += 1;
  frame->dlc  = (RASCIIOp.HEXA2Byte(rascii+idx) / 2 );
 
  if( frame->dlc < 2 ) {
    TraceOp.trc( "RASCII", TRCLEVEL_WARNING, __LINE__, 9999, "decode: invalid length of %d", frame->dlc );
    return '\0';
  }
  idx += 2;
 
  frame->dlc -= 2; // dlc = len - opc - nid
 
  if( frame->dlc > 120 ) {
    TraceOp.trc( "RASCII", TRCLEVEL_WARNING, __LINE__, 9999, "decode: invalid length of %d", frame->dlc );
    return '\0';
  }
 
  frame->opc  = RASCIIOp.HEXA2Byte(rascii+idx);
  idx += 2;
  frame->nid  = RASCIIOp.HEXA2Byte(rascii+idx);
  idx += 2;
 
  for( int i = 0; i < frame->dlc; i++ ) {
    frame->data[i] = RASCIIOp.HEXA2Byte(rascii + idx + (i * 2) );
  }
 
  return rascii[0];
}
 
 
 
#ifndef __RASCII_CODES_H__
#define __RASCII_CODES_H__
 
#define PREFIX_CMD '@'
#define PREFIX_EVT '$'
#define PREFIX_INF '#'  // Text must be also escaped in HEXA.
#define PREFIX_RSP '&'
 
#define CMD_INFO        0
#define CMD_START       1
#define CMD_STOP        2
#define CMD_GETCONF     3
#define CMD_SETCONF     4
#define CMD_RESETCONF   5
#define CMD_GETCV       6
#define CMD_SETCV       7
#define CMD_DOUT        10
#define CMD_AOUT        11
#define CMD_ACCESSORY   12
#define CMD_MOBILE_DIRV 13
#define CMD_MOBILE_FUN  14
#define CMD_MOBILE_DISPATCH 15
#define CMD_MOBILE_RELEASE  16
#define CMD_EBREAK          17
#define CMD_SOD             18
#define CMD_QUERY           19
#define CMD_SETIDTYPE       20
#define CMD_SETWIO          21
 
#define CMD_SERVO           23
#define CMD_TEXT            24
#define CMD_CLOCK           25
#define CMD_SIGNAL          26
#define CMD_SWITCH          27
#define CMD_BINSTATE        28
#define CMD_MOBILE_SHORTID  29
#define CMD_CLEAR_SHORTIDS  30
#define CMD_END_SHORTIDS    31
#define CMD_SHUTDOWN        32
#define CMD_MOBILE_STATE    33
#define CMD_SOUND_PLAY      34
#define CMD_OTA             35
#define CMD_REBOOT          36
#define CMD_PT_ON           37
#define CMD_PT_OFF          38
#define CMD_ACC_GETCV       39
#define CMD_ACC_SETCV       40
#define CMD_ACC_PAIR        41
#define CMD_MOTOR           42
#define CMD_SLEEP           43
#define CMD_SHOW            44 // Identify by flashing LED(s)
#define CMD_STARTCAM        45
#define CMD_STOPCAM         46
 
#define EVT_ALIVE 0
#define EVT_OCC   1
#define EVT_RFID  2
#define EVT_DIN   3
#define EVT_AIN   4
#define EVT_DSEN  5
#define EVT_ASEN  6
#define EVT_DOUT  7
#define EVT_ACCESSORY    8
#define EVT_SHORTCIRCUIT 9
#define EVT_BIDI         10
#define EVT_SENSORID     11
#define EVT_STATE        12
#define EVT_MOBILE_STATE 13
#define EVT_PT           14
#define EVT_IO           15
#define EVT_GOODBYE      255
 
#define BIDI_SETCV   0 // POM
#define BIDI_GETCV   1 // POM
#define BIDI_ADDRESS 2
#define BIDI_DYN     3
#define BIDI_EXT     4
#define BIDI_PT      5
#define BIDI_SC      6 // Short circuit
 
#define PROGOPT_PT     0x01
#define PROGOPT_ACC    0x02
#define PROGOPT_SET    0x04 // GET if not set
 
#define PORTTYPE_DOUT  0
#define PORTTYPE_AOUT  1
#define PORTTYPE_SERVO 2
#define PORTTYPE_PAIR  3
#define PORTTYPE_MOTOR 4
#define PORTTYPE_DIN   5
#define PORTTYPE_ACC   6
#define PORTTYPE_LED   7
 
#define STATEFLAG_POWER 0x01
 
#define PORT_STATE_STRAIGHT 0
#define PORT_STATE_TURNOUT  1
 
#define RFID_LENGTH_MASK  0x0F
#define RFID_STATE_OFF    0x80
#define RFID_STATE_ERROR  0x40
 
#define SUBIOTYPE_NONE     0
#define SUBIOTYPE_LED      1
#define SUBIOTYPE_SERVO    2
#define SUBIOTYPE_RFID     3
#define SUBIOTYPE_DCC      4
#define SUBIOTYPE_MOBILE   5
#define SUBIOTYPE_CAM      6
#define SUBIOTYPE_CANBUS   7
#define SUBIOTYPE_THROTTLE 8
 
#define MOBILE_STATE_LOWBATTERY 1
 
 
#endif


16bit NID

Proposal for 16bit NID:
If the first character of the NID is a ~ (Tilde) the following 4 characters will present the 16bit NID.

arduino/wio-rascii-fr.txt · Last modified: 2023/04/21 09:07 by phil45