Content → Command Stations → Raptor Digital

• Raptor

The line settings are all fixed:

• Baudrate 9600, 8 bits, no parity, 2 stopbits, no handshake

Unique ID for this controller.

The RS232 device to which the Raptor interface is connected. (COMx, /dev/ttySx, /dev/ttyUSBx)

The PC protocol is not recommended for polling S88 inputs; Not supported.
The manual states: "This “INPut” command is not designed and not intended to be used as a part of train controlling by a computer."

• http://www.raptor-digital.eu/
• http://www.raptor-digital.eu/Raptor_interface_protocol_1_0.pdf