WIO Overview

• WIOesp & WIOpico
• WIOpi
• WIO Support Library
• First steps
• UIO

This optional WIO Support Library is not necessary for the WIO infrastructure.
The following additional functions will come available in case the WIO CS is active:

• Simulate sensors. (Dry run testing)
• Initiate the DCC generator in IO16 type on the first 'Power ON' command.
• Support for WIO's connected to USB instead of WiFi. (The SSID must be set empty.)

If set greater than zero the WIO with this ID will become a DCC wakeup event.
This WIO will activate the DCC generator on receiving this event.

Simulate sensors in the trackplan by clicking on the symbols.
If the timer is set greater than zero the simulated sensor will reset.

Activate the USB communication for microcontrollers without WiFi: UIO.