• WIO Overview | WIO Setup | WIO Control | User Bitmaps | WIO Firmware | WIO Mobile | Cable | LEDScript | WIOpi
  • WIOpi-01
  • Headless Raspberry Pi Setup

The WIOpi-01 PCB expects the Zero header at the bottom side:

Buy a Zero type W, and not type WH. The header of type WH is on top.

If a Zero with the header on top is already available, the Zero connector on the WIOpi-01 can also be mounted at the bottom side of the PCB.

Important wiopi.ini settings:

• mobiletype → 1 for H-Bridge
• batterytype

See: wrapper

The WS2801 LED strips connection:

• WIOpi-01